24 Nov Transmission Maintenance and Transmission Repair in Elmhurst: A Review
Your transmission is vital to the overall performance of your automobile. If your transmission fails, so too will your vehicle. As such, it’s important that you care for your transmission in a thorough and consistent manner.
Need a little help with transmission maintenance in Elmhurst, Illinois? Then don’t stop reading now. This article has all the information you will need to know.
Swap Out the Pan Gasket
One of the keys to transmission maintenance is swapping out the pan gasket. The pan gasket is located on the exterior portions of the transmission and is used to prevent transmission fluid from leaking out.
Unfortunately, over time, the pan gasket can deteriorate. After some time, it may begin to allow fluid leaks. Because the transmission needs fluid in order to operate properly, these leaks can be dire.
This is why you it’s important to check the pan gasket frequently. If you notice any leaks, it’s recommended that you replace the gasket as soon as possible.
Clean the Components
As you might expect, transmissions are subject to a great deal of dirt and grime. Over time, this dirt and grime can impair the transmission’s functionality. For this reason, you want to clean your transmission every once in a while.
When cleaning, make sure to get every sub-component. You’ll also want to clean the inside of the transmission, which will require a fluid flush.
Some of the products you’ll need include a degreaser and brake cleaner. It is also helpful to use a hard thistle brush in order to scrub away tough residue.
Not confident in your ability to thoroughly clean your transmission on your own? An Elmhurst transmission repair company can complete the task for you.
Install a New Filter
Because transmissions are subject to so much dirt and grime, they’re equipped with filters. These filters catch a great deal of the residue that would otherwise make its way into the transmission, ensuring that it doesn’t impair the transmission’s functionality. Unfortunately, however, filters become dirty as well. A such, it’s recommended that you install a new filter every 2 or 3 years.
Changing a transmission filter isn’t as simple as taking out the old one and inserting the new one. To change the filter, you’ll need to remove the transmission pan. This will require you to get underneath your vehicle.
This is why it’s often a good idea to pass the task off to an Elmhurst transmission repair company. Your local transmission repair company will have all of the tools necessary to complete the task in a quick and cost-effective manner.
Give It a Flush
One of the most important aspects of transmission maintenance is the fluid flush. Over time, as transmission fluid sees more and more use, it becomes burnt. When this happens, it does a poor job of providing lubrication, which places wear and tear on the transmission’s various sub-components. The only way to take away its negative effects is to replace it with fresh fluid.
It’s important to note that you can’t add new fluid to your transmission without first flushing your old fluid. Doing so would have no effect, and would ultimately result in you wasting money.
While it’s certainly possible to flush your transmission fluid on your own, doing so requires a few expensive tools. As such, the task is often left for the professionals.
Looking for Transmission Repair and Transmission Maintenance in Elmhurst?
Are you looking for transmission maintenance in Elmhurst? If so, the auto mechanics with King Transmission Company are the people to see.
Our team is well-versed in the maintenance of vehicle transmissions, having helped to keep countless Elmhurst drivers on the roads. We would be glad to do the same for you.
Contact us now to begin the process!